Raymarine iTC-5 Instrument Transducer Converter 

iTC-5 front view

Transducer signals are easily converted to SeaTalkng

 

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkng. 

 

 

Transducer connections on the iTC-5    

Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods.

 

Extended STng systems can support multiple iTC-5 units.

 

SeaTalkng connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkng backbone.

 

Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).

 

If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers

 

  

 

Item

 Description

1

 Red - Speed and sea temperature transducer connection

2

 Orange - Wind transducer and rotavecta connection

3

 Yellow - Fluxgate compass connection

4

 Green - Rudder reference transducer connection

5

 Blue - Depth transducer connection

6

 SeaTalkng backbone connection

7

 SeaTalkng spur connection

8

 Sea Talkng backbone connection

 

 

Possible systems 

 

Note: In a SPX autopilot system the fluxgate compass and rudder reference transducer must be connected directly to the course computer and not the iTC-5.

Basic SeaTalkng System with iTC-5

  1. ST70 Instrument display
  2. 2 x i70 Instrument displays
  3. Terminated SeaTalkng T-piece connector
  4. Terminated iTC-5
  5. Rudder reference transducer
  6. Depth transducer
  7. Fluxgate compass
  8. Raymarine wind transducer or rotavecta
  9. Speed and sea temperature transducer
    iTC-5 Basic STng system 

 

Extended SeaTalkng System with iTC-5

iTC-5 Extended SeaTalk System 

  1. ST70 Instrument display
  2. p70r Pilot Controller
  3. i70 Instrument display
  4. AIS tranceiver
  5. SPX course computer (supplying 12 V power to SeaTalkng network)
  6. Man Over Board (MOB)
  7. SeaTalkng 5-way connector
  8. Rudder reference transducer (connected via SPX)
  9. Fluxgate compass (connected via SPX)
  10. Multifunction display with built in GPS
  11. SeaTalk to SeaTalkng converter
  12. iTC-5
  13. Terminated iTC-5
  14. Trim tabs
  15. Engine data (connected via devicenet adaptor)
  16. Terminated SeaTalkng 5-way connector
  17. Depth transducer
  18. Speed and sea temperature transducer
  19. Raymarine wind transducer or rotavecta


iTC-5 icon   iTC-5
Explore features2   Explore Features
Specs   Specifications
Ordering Info and Part Numbers   Ordering Information


Sök närmaste Raymarine Återförsäljare 

 

 Pinpoint Raymarine Dealer 

 

Inhandla produkt från närmaste Raymarine Återförsäljare 

Sök din närmaste Raymarine Återförsäljare nu