CP370 angled - small 
  • Applicable for:  CP370
  • Software Version: v13.34
  • Release Date: July 2017

Downloading the Software

Select the software update below depending on which Multifunction Display you will be using to perform the Remote Update. Please note if you have a G Series or a/c/e/gS Series you must check what version of software you have installed in the unit that you are using to perform the upgrade. For further information on this please click here.

A Series C Series Classic E Series Classic C Series Wide E Series Wide G Series a/c/e/gS Series
A Series
C Classic
E Classic
C Wide
E Wide


G Series 


a/c/e/gS Series



 using an

 a/c/e/gS Display  

 before using on  

 G Series 








View Update Instructions |  View Latest Manual




It is important that your Multifunction Display is on the latest software, which can be downloaded HERE




This firmware update process is done at your own risk. Before initiating the update process be sure to backup and make copies of all important files

If the firmware process is interrupted your product may not function properly, therefore do not interrupt the process and ensure the unit is on a reliable power supply. Damage caused by incomplete upgrades will not be covered by Raymarine warranty. 

By Downloading the software, you agree to these terms.


Open Source GPL/LGPL

Some Raymarine products contain software code developed by third parties that are covered by open source GPL and LGPL software license agreements. You can view the third party license agreements by visiting the Manuals and Documents section of our website.

To access the open source GPL and LGPL licensed executables click here


Software History

Version Release Date Features
v13.34 App Jul 2017
  • Corrects the Status LED, so inform the user when a transducer is not being sensed by the SONAR (one amber blink)
  • Changes the way the CP370 communicates over Ethernet, as it was discovered when networked along with a Digital Radar, it could cause the Digital Radar to reset after an intermittent period of time.
    • Note, once upgraded to v13.34 you cannot downgrade back to v13.30
v15.02 Platform  Jul 2017
  • Production Release Only, to support component obsolescence - no end user enhancements
v13.30 App Mar 2015
  • Modifies test program in production. No functionality changes seen by end user.
v13.27 App / v13.28 Platform Feb 2015
  • Initial Release