Raymarine SeaTalk^hs Connections

Networking two devices

The most basic system may consist of a C Series Widescreen or an E Series Widescreen with a DSM30, DSM300 or a radar.

Using a SeaTalk^hs Crossover coupler, they can be quickly and easily connected together. Because the components are all auto sensing, there is no complicated setup required. Simply plug them in.

If you're not using a DSM, you can link any two E Series Widescreen displays with the crossover coupler too.

Multistation Networking - New HS-5 SeaTalk^hs Network Switch

SeaTalk^hs data is quickly distributed to other SeaTalk^hs using the HS-5 Network Switch.

The switch has 5 ports - 4 RayNet ports supporting 10 or 100 Mbit/sec network speeds and a 5th gigabit port allowing a higher speed across switches, should a 2nd switch be necessary.

When networking three to eight SeaTalk^hs devices, the SeaTalk^hs Network Switch can be used.

The auto sensing SeaTalk^hs components make setup a breeze, simply plug them in. SeaTalk^hs does the rest.

SeaTalk^hs Raymarine Products

The following devices have SeaTalk^hs connections and can be easily connected together via the SeaTalk^hs network switch and SeaTalk^hs network cables:

• New e Series Multifunction Displays
• New c Series Multifunction Displays
• C Series Widescreen Multifunction Display
• E Series Widescreen Multifunction Displays
• G Series Navigation
• E Series Classic legacy Display
• T Series Thermal Cameras
• DSM30 and DSM300 Fishfinders
• Super HD and HD Digital Open Array Radar
• Digital Radome Radar

SeaTalk^hs Network Cables

Available in multiple lengths to simplify installation, the SeaTalk^hs network cable locks positively into switches and couplers.

SeaTalk^hs Patch Cables

Highspeed patch cable for connecting a SeaTalk^hs switch with a PC or G Series monitor.

SeaTalk^hs Dual End (Waterproof) Cables

The Raymarine SeaTalk^hs Dual End Weatherproof Network Cable is designed to connect your Raymarine C-Wide or Raymarine E-Wide to a DSM30 or DSM300.